Skip to main content

Reply to "Reverse board won't go forward, bad transistor or some thing else?"

quote:
You can test the moc for continuity with a 5 volt test signal, but you will need to lift pins.

Be very careful if you test the optocoupler. The input side is an LED that must have the same current limiting resistance that other LEDs require.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×