Well Mark, for starters the AM pilot is 1-3/4" wide, the Flyer pilot is 1-7/8" wide. So the end railings won't clear the pilot sides but probably be flush:
It's really going to take some trial and error for positioning and not be a simple drop on installation. If you're going to order the railings, be sure to get the new brass ones, the plastic ones are too fragile.
The end railings line up with the simulated sorta "footboards" on the Flyer loco. The end railings would have to be bent outward at the bottom, cut short or something to build up for mounting to the top of the pilot.
The side railing ends appear to hang a little low for the Flyer frame, they could be moved up a little to compensate, the same would hold true for the cab railings.
Rusty
