I was sent two diagrams to explain the wiring of the DZ-2500s to the Ross 3-way; one was the 3-way using DZ-1000s and DZ-1008s and the other was the X-over using DZ-2500s.
Neither of these are easily merge-able into the solution; HAS ANYONE WIRED a Ross 3-way using DZ-2500s and DZ-1008s that could then share a wiring diagram with me?? I have sent an email to Steve at Ross Custom but I have not received a response as yet.
Still trying to understand the 3-way connection to the two DZ-2500s. The diagrams for the 3-way show flipping the A & B rails power to ground; while the X-over shows the 1 & 2 rails going from power to no power.
Thus I see that I must flip the power/ground on rails A and B depending on the direction out of the switch. got that concept.Actually only one of the A B rails needs to flipped in an either up or down switch position and that would be power; at a straight thru position both A&B rails are ground.
Trying to not keep doing this on a trial and error basis.
thanks in advance.