Skip to main content

Reply to "Ross Standard Gauge Switch anti-derail"

We just solved this in the electrical forum. There were a number of solutions proposed, but the easiest involves using the LGB 12070 Supplementary Switch that attaches to the LGB switch machine. Here is the link to the thread. https://ogrforum.ogaugerr.com/...7#118696450449922347

See Keith’s (Oman) post near the end for the wiring diagram. 

One note, above I say that the LGB switch uses DC. That is not correct. The LGB switch uses 18V half rectified AC. This is similar to, but not the same as DC. The PIKO and LGB switch control boxes mentioned above work with either AC or DC and the switch will work with DC, but you will see that the switch power in the anti-derail circuit uses AC as the power source for the LGB Switch machine.

George

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×