Skip to main content

Reply to "Ross Switches Direct Current"

You need a 12 volt DC power source. You have a few options.

  • You can add a AC to DC rectifier to a circuit from your AC accessory transformer.
  • You could buy a cheap HO transformer
  • Or, you could salvage a DC wall wart from some old piece of electronics. I save old wall warts. You can see the power rating on the back of them. It will read something like Output DC 12V 2A. Amazon has one for $8.99. Just cut the plug off and wire to a distribution block to your switch machines.
  • PIKO switch controller that takes AC power and controls the LGB switch machines that Ross uses.

George

Last edited by George S

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×