Skip to main content

Reply to "Ross Switches Non-Derailing wiring Question"

Rod,

I figured it out!  I ran a jumper wire between the common on the switch terminal block and the track terminal block.  I used the corresponding common that was running from the AIU and the common for that specific block of track.  I tested it and it works.

Thank you,

Darren

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×