@msp posted:Ok well I am not a complete dumb@$$ I do have bluetooth and I do have a legacy engine. However, after reading the above I thought it might be a joke. So I reread the top of the thread to see where K-line came from....and I see maybe I am just a partial dumb@$$ I forgot, back in December when I started this thread I referenced a K-line engine. However, I passed on that one, forgot i mentioned that, and actually purchased a Lionel Legacy engine which I realize was not clear when i picked back up the thread last night. So I apologize for sending everyone on a wild goose chase. However, the same still applies.
With then steps above with Lionel Legacy loco. I get nothing....but yes it works in conventional mode and bluetooth.
Magicland I do appreciate the direct response.
I did plug directly to wall and run wire to outer rail.
Okay, so it appears the issue is on the TMCC side, since you've verified that the engine is working. You mentioned that the light on the remote is clicking when pressing buttons. Is the light on the command base (green LED) lighting when you press buttons on the remote?
And the limitations of the app is that it will ONLY work with Lionel engines that have bluetooth. Lionchief plus, lionchief plus 2.0 (but not the original Lionchief) and NEWER legacy engines. Older legacy engines don't have bluetooth.
