Certainly possible, as mentioned above. You control the conventional loco with the transformer and the LionChief with either the universal remote, the app or the TMCC/Legacy remote depending on what you choose and have available. Somewhat depends on the conventional loco and the length of the train and the length of the loop in order to keep the two trains separate, in terms of convenience. You'll have to pay attention 
. The LionChief loco will probably stop if the voltage gets much below about 10-14 volts, and at these voltages, the conventional loco will continue to run, depending on its characteristics. So experimentation will be necessary and the effort may not be worth it in some instances. Easiest to keep the command loco(s) and conventional on separate loops/blocks for most people is my guess.
|
|
