CaseyKen posted:Thanks again for all the help. Darn, I don't see any of the nickle-silver or stainless track curves being tight enough to fit my 5x9' layout; my AF track has 40" diameter curves (measured from outside ties; 38" measured from center of the rails). Smallest Gargraves stainless is 42" dia, which won't fit my layout. Don't see any brands of stainless or nickle-silver with AF curve diameters (40" outside-tie dia). But, maybe its there and I'm just not finding it. Also, would be great if the stainless or nickle-silver track I eventually find would button right up into my AF switches, as I have 13 of them and can't really handle the cost of replacing all of those.
On with my quest -- I'll keep looking...
Both Lionel FasTrack and MTH S-Trax have 20" radius curves compatible with Flyer track, along with switches.
Granted, replacing the switches with either would be $$$, though. Doug Peck of Port Lines Hobby Supplies shows the MTH/SHS-Flyer adapter rail joiners in stock. These will work with FasTrack also.
MTH-RJ-1012 | MTH S-TRAX 35-1012 RAILJOINERS/SECTIONAL TRACK; 36/pkg | 17 | $8.95 |
Rusty