Skip to main content

Reply to "S Scale"

@AmFlyer posted:

DL&W Pete, welcome to S scale! That question you just posed is one we would all like to have answered. What will happen to the Showcase Line? MTH purchased the Showcase line from SHS and except for the packaging all the track products are identical. So when searching for track search as SHS/MTH. MTH makes 19", 24" and 29" radius curves, uncouplers, bumpers, action tracks and 19"radius turnouts. They make 5", 10" and 15" straight sections. They also of course make flex track.

My layout is built with all MTH flex track. The layout is basically scale except for the .138 rail rather than code 83. I did that so I could run Lionel American Flyer engines. All the Legacy engines beginning with the Y-3 and newer will run on DCC. If you cannot find MTH flex just buy the Fox Valley flex, it has the same .138 rail height. Fox Valley also makes excellent #5 turnouts.

Since I needed a lot of #6 and #8 turnouts, I paid to have them custom made for my layout using the MTH rail we stripped from their flex track.

There are several very experienced S scalers here, some of whom have already provided information. Technically I am a High Rail operator since I have .138" rail on my layout. However I can run all but the longest wheelbase scale equipment on my layout.

I am ready to buy flex track, I found SHS on trainz website for 50.99 for 6 pieces which equals 20'. Will this flex track match the #5 switches from fox valley. It says 2 rail "T" track #155 rail, am I good to go.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×