Skip to main content

Reply to "Schematic for QSI DCRU"

ogr qsi pcb

Putting a picture to G's words, the 2 NAND gate outputs (pins 3 and 4 of the 4093 chip) go to the header.  They jumper over one slot to "B1" and "B2" as etched on the board.  B1 and B2 go to the Base of the 2N5087 transistors labeled 1 and 2.  The transistor outputs drive the relays labeled 1 and 2.  Your board has 4-wires in place of the header jumpers - apparently to manually set the relays?

Attachments

Images (1)
  • ogr qsi pcb

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×