Skip to main content

Reply to "Scope readings of the DCS signal"

Daniel Auger posted:
Adrian! posted:

...Now with the TIU and WIU connection (with the USB port on the TIU) the logic on the TIU board is powered by the +5V coming on Pin 1 instead of track power...

If you have an elegant proposition to get rid of this power coming from the WIU (via USB), that would solve this problem and at least one more that I know: The more complicated reset of the TIU after the use of the Emergency Button when a WIU is present.

Would the USB work properly without Pin1 ?

Thanks for your post !

+5VDC from the WIU is not required for anything if you have some other power source.

You can snip it. Snip it good.

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×