Carl, Thanks, great drawing!!!! The table not including the control shelf measurements you picked were very close. On the far end you were right on. 16' down the left wall with 12' on the back and 8' on the right with a 2x5' walk in.
The near table with the tunnel was an addition and is separated by a 24" bridge and that table is 6' wide X 10' off the wall. So it is 2' shorter in with and depth than it's counter part on the other end. I do have TVSs on the lockons and 10 amp breakers on the ZW already.
This loop will all be elevated so no grade consideration will be needed. I am up for suggestions as for what track to use as well because I will need to buy what I will will need. Was thinking maybe regular O in 72" curves and no less than 54" so at a later date it could go into a control system loop.??
I could save by using O27 profile track because I do have a pair of new O42 switches and lots of track but nothing is not cut in stone at this point.
