Skip to main content

Reply to "SER2 DB-9 issues/Legacy System Utility"

Originally Posted by cjack:
I just checked the bad Base and pin 2, recv data is very loaded down...barely a volt or so of transition. Pin 3, send data is fine. So the receive input of the Base is shorted somehow. I take it this is a Uart chip of some kind. Wonder how hard it would be to find and replace. Surface mount no doubt...

Are you measuring this with a multimeter to the unconnected serial port pins on the Base, or with a 'scope monitoring an active connection between the Base and another serial device (like your USB serial adapter)?

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×