Skip to main content

Reply to "Shelf Couplers"

@Greg Amer posted:

I bought a few sets of the Shelf Couplers from Jimmy Booth to check them out. I’m not sure of all the varieties he is selling, but I bought 2 pairs of double shelf Type E, 2 pairs of lower shelf Type E and 1 set of Type F.

They are cast brass with 5 parts - the receiver, the knuckle, the tongue, the pin and a spring for draft gear. I also ordered the draft gear boxes - They are 3d printed resin in 2 parts a top and a bottom. The draft gear boxes have some detail including a key slot.

The couplers took me about 15 minutes to figure out how to assemble. Simply slip the tongue into the receiver and push it all the way up open position. Then push the knuckle into the receiver. Then pass the knuckle pin through the receiver and the knuckle to hold the knuckle in place. That’s it. Push or pull the tongue up and the knuckle opens, close the knuckle and the tongue drops and locks the knuckle closed.

I have yet too install them or operate with them so can’t really comment there yet. A few I’ll have to tackle are

1 - limited swing distance, what will the minimum radius with these installed.

2 - bottom operated or modify to top operate. I’m thinking I can install a small steel ring on top to the tongue to operate the couplers with a magnetic wand.

3 - finishing and lubing them. I’m thinking chemically blackening the couplers and applying graphite to the moving surfaces as well as the striking surfaces.

Definitely beautiful. Thank you Jimmy for this beautiful product!

rocky@glacierparkmodels.com

And thanks again JayC for the tip.

Greg,

Did you make any further progress in installing these shelf couplers?

Do you need any tools for getting these castings ready for installation like a drill press or an air brush?

I just ordered a set of the Lionel 30K, tank cars  and think that these double-shelf couplers would be a better choice over the Kadee couplers that I am used to.

These are just my opinion,

Thanks,

Naveen Rajan

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×