This is a copy from the manual of the socket diagram and pin socket key. To get this engine to run on DC, do you think connecting pins 1 & 8 (for the right side) and pins 4 & 5 (left) will get the job done?
I have learned the LEDs are 5 volt. Seeing that a 5 volt pin (12) is available, what pins do you think should be jumped for the LEDs?
The DC shorting plug from SHS is proving very hard to find and jerry-rigging my own might be my only hope.
John, thanks for the picture of the needle point awl. Looks like I can try a needle in my pin vise.
Tom Stoltz