Hi and thanks for the replies. I am not yet ready to start gluing the fabric to the fiber ends because I still am not quite sure how to get the fiber end free of the smoke unit itself ( have gotten the opposite fiber piece free by removing the small screw that attaches the crank to the gear wheel). I have been taking a look at the smoke unit from all angles and it would appear there is a nut attached to the metal tube through which the air from the bellows goes through to get to the heating chamber. I'm pretty sure I need to have both fiber pieces free in order to start gluing the fabric on. Is this the trick to getting the other fiber piece free? I have searched everywhere and I cannot find anything that explains how to get that fiber piece free. Thanks
|