Skip to main content

Reply to "Smoke Output On PS1 Diesels"

Sid's Trains posted:
gunrunnerjohn posted:

I just buy the gaskets from MTH, they're readily available. I don't recommend silicone, the gasket is more than sufficient to properly seal the smoke unit.

FWIW, if you're not getting a significant quantity of smoke at 9-10 volts on the track from a PS/1 smoke unit, something is wrong.  They have a voltage regulator circuit to insure vast quantities of smoke at most conventional voltages.

I didn't even know Mth had the gaskets. I have never had good luck with their parts department so I just gave up and founds ways around it. I know silicone isn't the best but it works for me. 

MTH IB-0000006-5  Gasket (for standard smoke unit) (25.0x37.0mm) (0.5mm thick)

The previous picture was one that I took out of the parts box, I have no idea of the condition of the wick, but they'll smoke good until the wick looks pretty grim.

Last edited by gunrunnerjohn

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×