Skip to main content

Reply to "Smoke unit from K-Line Crusader"

It appears the resistor was mounted too close to the board. You could probably fix it just by replacing the resistor and gasket. If you get a complete board check to make sure there is some space between the resistor and board. Also lube the piston O ring or better yet replace it. These swell and cause a great deal of resistance and rob your engine of power.

If you have the smoke unit out now, see how many cars you can pull, then check again after you replace the unit.

Pete

Last edited by Norton

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×