Skip to main content

Reply to "Smoke unit from K-Line Crusader"

The only "wiring" is to connect the two plugs to the new board, and run the one wire (normally blue) from the 10-pin connector on the CC-M to pin 24 of the R2LC socket.  A little heat-sink compound for the drivers bolted to the heatsink and you can program it up and go.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×