Skip to main content

Reply to "Smoke unit suggestions?"

Well, there's no fan driven smoke unit that's truly a "drop-in".

I use the MTH steam smoke unit with the short posts for TMCC or Legacy upgrades.  I bend a chunk of 1/16" aluminum sheet for fabricate a mounting bracket, and then solder a brass tube extension on the screw-in funnel.  I swap out the two 16 ohm resistors for a single 8 ohm resistor.

Probably a typo here.  GRJ usually recommends a 20 Ohm smoke resistor for TMCC Steam and 27 Ohms for TMCC Diesels.

Bob

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×