Skip to main content

Reply to "Smoking Caboose 19807 resister use with Command Control"

I use the MTH HO smoke unit.  I tune the voltage on the resistor for the desired smoke level, typically around 5-6 volts, and then use diodes to drop the voltage to the motor to around 2.5-3.0 volts.  I just use a little DC switching supply for the power.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×