Skip to main content

Reply to "Solder paste, good to use?"

Its okay for plumbing in some instances, or soldering non electrical items.  I would not use it on electronics.  It is a fairly active flux which is not good unless you have an inline chemical wash system.

I would recommend mechanically clean your surfaces or pre-tin them.  Then use tin lead solder with rosin flux.  Much lower heat than leadfree or SAC305 and much better solder joint. 

Last edited by aussteve

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×