Skip to main content

Reply to "Soldering to Gargraves Track"

Hard to believe a soldering gun isn't getting hot enough to solder to Gargraves Tinplate track!  I soldered hundreds of connections to my track during my build, and I did it with a 30 year old Weller 100/140 soldering gun.  Obviously, I made sure the tip was good and the tip nuts were tight.  With those obvious common sense steps, the gun got plenty hot to quickly solder to the Gargraves track and the Ross Switches.  Note that you do have to take the blackening off the center rails to solder to those, but I hope that's obvious.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×