Skip to main content

Reply to "Solved all my DCS signal problems by pulling a plug!!!!!"

Remove all TMCC/Legacy locomotives from your layout. Unplug the TMCC base. Run DCS locomotives. Plug the TMCC base in. See if there is any signal problem. If not add TMCC locomotives back one at a time (i.e. only one TMCC locomotive on the layout powered up at a time). See which locomotive causes DCS signal issues. Install choke on that locomotive. Problem solved. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×