@GregK posted:That's the trouble, I might not like it the more I look at it. The size is a bit of an issue - the table is big enough for a wider radius curve loop, but not enough space to do too much more while maintaining a wider curve minimum.
I've been looking at this one quite a bit: https://ogrforum.ogaugerr.com/...-train-layout?page=1
I may try adjusting this to fit an O60 outer route. I noticed that as the curves get wider, you also need more length to do things like reversing loops...so my 6x12 might be a challenging size - I might have to see if I can squeeze 6x13 or 6x14 instead, which might add just enough extra length to allow more interesting operation while maintaining at least one O60 route.
Might be going back to the drawing board on this one.
Hi Greg, I went with an original design from Ken and widened the table to 6’ with a 16’ length. As you can see from my AnyRail design there’s some nice train action with a reverse loop. I was given some excellent ideas from other forum members that I used(thanks to all who helped). My original plan was quite boring. Each loop has 4 feeders with 10 power blocked sidings. The outer loop is O60.
Gene
