This engine is from 1997 but only has about 2 hrs run time it was only used as conventional and always worked fine. It was placed on the track recently and no sounds at all upon startup. it runs fine in forward & reverse and the lights are ok except the ditch lights do not work. I read that the engine features could be reset w a tmmc controller. I did try this several times to no avail.When in tmmc mode , the engine runs forward and reverse w/ some lights working . No mars light or ditch lights. again there is no horn , bell or railsounds. I removed the shell and could not find any wires loose so I'm thinking a ckt board, but not sure which one. Any help will be appreciated. Thank You!
Original Post