Skip to main content

Reply to "soo line sd60 w/tmcc & railsounds no sounds in either conventional or tmcc"

Your symptoms could mean a bunch of different things.

1) Definitely confirm that you're restoring/resetting the locomotive properly. The proper reset code should be 75.

2) Once reprogrammed, check that all lights function properly, including the strobe light and ditch lights.

3) Play with the volume control pot (it's one of the fans) a few times to be certain the volume wasn't set all the way down or there wasn't a dead spot in the control. Also, try the horn and bell functions -- does anything happen at all? If you get a horn and bell but no background sounds, there's a switch underneath for sounds that is set incorrectly.

4) If you're still not getting any sound, re-confirm that the sound is NOT working in conventional as well as TMCC modes.

Try the above and report back with what you found and/or heard.

TRW

 

Last edited by PaperTRW

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×