Skip to main content

Sounds quit on my TMCC Hiawatha Station Sounds Diner (6-29199)

The last time I ran this set was in 2019. Everything OK. Today, no sounds. Here's what I did to try to diagnose/fix the issue.  First, I turned the volume POT to full. Nothing. I then reprogrammed per the manual to "restore features."  No sound.  I reprogrammed a new TMCC ID#.  No sound. I pulled out the guts of the car and as was suggested in another thread, pulled and reseated the 3 circuit boards: Radio Rcv'r; Railsounds; and the Railsounds Power board.  Nothing.  I think the RC/LC must be OK because it responds to commands to reprogram the ID and it will respond to lights on/off commands...nothing else. I then looked in the Lionel parts database...it's listed but "Unavailable".  I'm considering maybe the Railsounds Power Board (691RSPRA00) may be the culprit..(Well I hope so sine the sound board is unavailable) but it costs $40.00.  Oh, I've performed all these steps on the layout using a Cab-2 and then again on my test track using a Cab-1. I didn't think it would matter...I was right, it didn't. The only other step I think may be useful is to pull the chips and reseat them. Don't want to attempt that unless that is a logical next step at this point.  Is there anything else I should try?  Oh, also, anyone know of a source for these sound boards?  Thanks.

Last edited by ToledoEd
Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×