Skip to main content

Reply to "Static Grass, Who Uses the System"

The glue is extremely important.  I ended up mixing white glue, carpenters glue and water  roughly 2 parts glue to 1 part water,  and I also wait about  5  minutes before applying the grass, the tack of the glue tends to increase with a little time exposed to the air, but too long isn't good either... 

The other must in my experience has been using a small shop vac with a 1 inch hose and a small piece of cloth over the end of the hose to stand the grass up, and pull up the pieces not adhered.  I usually let it set up for at least an hour, preferably longer,  before going near it with the vacuum.   By using thin piece of cotton or panty hose or something over the end of the suction tube you can recycle the static grass fiber.     I have also experimented with using some spray adhesives applied very lightly to add second coats of static grass.    

There are some good Youtube videos for both applying the grass, and also for making your own applicator...

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×