Skip to main content

Reply to "Stevenson 0-6-0 Build"

@Norton posted:

The way I did it was to first anneal the brass strip so it would bend easier. Then soldered one end to the underside and finally just pulled it around the cylinders soldering it a bit at a time. Clamping was a bit of a hassle as there are no parallel surfaces.

Pete

That where a Laser welder would be handy

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×