Skip to main content

Reply to "STM2 and DZ1000 compatability?"

cjack posted:

I know the Green wire ON the relay drives the relay, but did you try driving the Green wire ON the relay with the Yellow wire on the DZ2500? Just a thought wondering if it is the signal from the DZ2500 or the relay itself. Do you have a separate source, maybe 12 VAC, that you can apply to the relay without the DZ2500 connected to see if the relay works? Connect the common lead to the black on the relay and the other lead to the Green wire ON the relay.

Chuck,

Yes I did try the green wire on relay connected to the yellow wire on the switch. 

Dennis did say that the relay can be activated by a min of 5v. I will try hook-up another power source, but I think its broke. As I mentioned everything is working in the system besides the relay. There is power on the green wire and will lower depending on switch position. No matter what there is 5v on the comm to STM2 from relay no matter which way the switch is thrown. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×