Skip to main content

Reply to "Subway track spark simulation"

From the looks of it, might be one leg of an LED attached to ground, and the other leg close to the center rail (or connected to a wire going to the arm of a microswitch) where it can be momentarily pressed down by wheel flanges or pickup rollers, thus sending a brief burst of current to each LED.

 

---PCJ

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×