Skip to main content

suggestions for an initial track cleaning?

HELP!

I'm about to give up. I have brand new Atlas 3-rail nickel silver track that I installed and ballasted. I take care that the glue/water mixture never hit the rails... but taking a new piece of track from the box gives me dirty fingers if i run them along any rail.  I have tried everything I can think of:  scrubbing with 91% isopropyl alcohol, denatured alcohol, and goo gone multiple times (using a clean white shop cloth)... and I still get dirty fingers when i lightly run my fingers along the track.  (the pic was after I ran my finger along one of the side rails, so it's not the black color coming off the center rail)

not so clean

Is there something I should be doing or using for an initial cleaning after the track is initially laid?

Attachments

Images (1)
  • not so clean
Last edited by ScottV
Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×