Skip to main content

Reply to ""Surging" issue on a PS2 engine"

Originally Posted by John Korling:
When under load (meaning pulling a fairly heavy train) it "surges" quite heavily and constantly until you get past 8 SMPH.  By surging it slows down to the verge of stalling, then it rapidly accelerates up to the programmed speed. 
Any thoughts?  I'm almost inclined to think it's something with the tach reader but I wanted to get other's input as well.

John, when time permits, I'd be interested in the following two experiments which shouldn't take long.  Run engine under load:

 

1. in conventional at 8 sMPH or thereabouts - probably around 10V or so.  Is the surging behavior any different?

 

2. in DCS at 8 sMPH.  Lower track voltage to 12V or so.  Then up to 18V or so.  Does surging behavior change?

 

This is simply an attempt to further slice the pie.  

 

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×