Reply to "Tang Band speaker module installed in S-Helper SW1"

Rayin"S"OGR Forum Member

Ray,

Are you sure about that? My instructions for an as of yet uninstalled mini commander version 1 state that a run/program switch is required. As far as machining, I realize a hole along with 2 additional threaded holes need to be made in the chassis for the switch. Some of the older tutorials on Carl's web site are for early versions of the mini commander board which contained triacs? that seem to require a sink to dissipate the heat. The mini II as stated by Carl does not require them.

Rich

Rich,

If you go to the ERR website and look at the instructions on soft set programming you will find that the Mini-2 can be programmed using this method. I used this method after installing the Mini-2 in an American Hi-Rail Doodlebug, in which, I did not want to cut a hole in the chassis. It is applicable I believe only at this time to the Mini-2.

We may want to carry this subject to a thread in TMCC as this one was started with DCC.

Ray

3/7/178:31 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!