It looks great but you missed securing the green wire loom Dennis.
Also, to move stresses off connections of heavy, draped wire, push the bundle to the left thru the wire stay slightly and wrap the wire bundle with a small zip tie(s) tightly to the left of the wire stay so it's head will butt against the wire stay when released.
Ideally the wires should sort of push at the terminals vs pull. Any wire stress down the line to the right is now held at the wire stay vs the crimp connections. Loops of excess I hang on the run (the right).
A fun way to dress some minor excess slack is to wrap a few turns around a phillps screwdriver or pen to "shorten it" then pull to length, then pull the coils off the driver, and slowly pull it to length.
It's silly, but visually effective dress.
