Skip to main content

Reply to "The Car Works - Brass Traction - Experience?"

@lionel1946 posted:

Pete, any suggestions on how to best/safely/easily remove the shell? I can just see myself removing a bunch of unnecessary screws!

I'm not familiar with either of these car bodies (Hollywood or 700 series LAP), but generally if the car body's truck bolster screws are not accessible from the under-body, usually at the edge of the car sides and bolsters, then you'll have to separate the car body(roof-sides-ends) from the floor/chassis, which is usually done removing screws at each corner of the underbody, with possibly another pair or more towards the center of car. If you can post a shot of the underbody, I'm pretty sure the advice will flood in. Note for sure, if you're going to bring these to life you will need to get comfortable with separating the chassis from the car body.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×