Skip to main content

Reply to "The Car Works - Brass Traction - Experience?"

You're going to have to figure out the disassembly - may be a simple as 4-6 screws around the bottom.

Just what drives are actually installed in these?  Underside photos would help. Not all came powered and some modelers fiddled about replacing things -- good point above on how drives were set up; not all were either/or for overhead wire. Might try checking power directly to the power truck leads and also check whether the wheels are insulated at all.  Could also be that it's sat for so long that the the gearbox needs a good purging.

Last edited by mwb

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×