@PRR1644 posted:I have DZ2500 switches, hooked up to a LCS CSM2. The serial data is connected to a DZ2001 data wire attached to a SER2. For some reason the CSM2 serial data was hit or miss. This setup works every time thanks to Gunrunnerjohn's advice. I can change turnout positions on the LCS app and it shows the correct position however if a switch is changed by a derailer or by hand the LCS doesn't update that information. Is there something I am missing or do I need another LCS component? Thanks, John
The CSM2 should have the ability, if connected correctly, to update the switch position on the LCS program. It's built into the module. I am not familiar enough with the CSM2 to help troubleshoot this as I use the STM module for my switch positions from FasTrack switches.
That being said the CSM2 module should be able to do what you want.
