Will the ASC2 be able to control the following?
Operating Track Section
Culvert Loader
Coal Loader
AMC/ARC Log Loader
Intermodal Crane
thanks,
timmy
Hi Timmy,
The ASC2 can operate any device that is currently controlled via an on/off switch. Think of it as 8 individual remote controlled switches that you could wire up to the power input of any accessory that got a physical switch on your layout. You'll assign each of these switches a sequential TMCC Accessory ID and then you can operate them from a lionel cab remote or any LCS aware app, such as the LCS App for iPad.
The ASC2 is not needed in the case of the AMC/ARC Log Loader. It's already got command control built in. You can run that accessory with just the LCS WiFi and the free LCS App for iPad. There's even a custom control panel for that particular accessory and you can read about it here:
http://www.lionel.com/lcs/APP_...C_CMD_Log/index.html
An accessory that is already command-controlled does not require the ASC2.
Cool, so the Culvert unit and Coal Loader should work with the ASC2 as they only need an on/off switch.
The Operating Track uses 4 wires though, although it seems like it should only need an on/off switch as well. How could you wire this to an ASC2?
Guess the intermodal crane never has a chance to become command controlled.
The manual, whenever it's available, should show you how to connect the Op track. Probably uses more than one output?