Skip to main content

Reply to "THE LCS THREAD - Post LCS Questions, Info and Updates HERE"

I finally got my sensor track setup working by swapping the cable between the first and second sensor track. I checked the cable with the ommeter and it is good. Upon further inspection the problem was a bent connector on the sensor track that caused it to not work with that cable. These sensor track connectors are soldered to a pcb with no other support. Be gentle with the connectors and do not rely on keying. You can see which way they go in. They are not robust like a usb connection. After inserting the connectors do bend the cables 90 deg to use the notch in the sensor track. The cables are too thick and may pull the connector loose. Keep them parallel under the track for some distance from the connector.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×