Railsounds posted:Flyboy62 posted:Thanks Rudy. Next Subject. I am using the ASC2 modules to control 40 Atlas switches by providing a ground to the Atlas 6924 on-derail board. I have this working with DCS but I am abandoning all DCS and going 100% Lionel. Is there a limit to how many ASC2 modules can be daisy chained together? Do I need multiple SER2 units to drive the modules?
dick
Flyboy62, you do not need a SER2 to run an ASC2. The ASC2 is connected directly using LCS PDI cables. 10 ASC2 modules chained together is fine.
Flyboy62... here's a very crude diagram that may help (if needed). The diagram does not show power and common hooked up to the ASC2, so don't forget those connections.