Skip to main content

Reply to "THE LCS THREAD - Post LCS Questions, Info and Updates HERE"

SantaFeFan posted:

Unfortunately, the DZ-2500 is not compatible with the STM2.   I have talked to Dennis at Z-Stuff, and Lionel is reviewing the options to support the DZ-2500 in the future.

The DZ-1000 may work, however we have not tested this controller and are unable to give guidance at this time.

If you use the DZ 1008A relay modules, you could put +5 vdc on the NC contacts and -5 vdc on the NO contacts. Then the C terminal would behave just as the RSC terminal yellow wire from the Fastrack switches and would be wired to the 16 inputs of the STM2. The 5 volt power supplies using isolated wall warts are quite available from many sources and you would only need one of each to supply the + and - 5 vdc to many DZ 1008A relay modules. There is almost no current requirement for the inputs of the STM2.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×