Skip to main content

Reply to "Thoughts on traditional track options/AF display progress"

LIONELSKI, I would add one recommendation to what you have done, I would put a drop of Railzip on each pin as you assemble the track. many times the inside of the rail where the pins enter is oxidized, I did this on all sections of my track and the continuity is very good, consider also soldering power drops not farther apart than five rail sections to be trouble free.

Ray

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×