Skip to main content

TIU Problem

I have four circuits passing through a TIU.  Recently, the circuit passing through position 4 stopped working.  As I apply power to this circuit, the Z-4000 shows amps increasing to about 8 as the voltage reaches 12.  And, the track that is serviced by this circuit shows no power.  So, I moved the input/output of position 4 to position 3 on the TIU and the circuit worked fine.

I would appreciate suggestions on what I should try to fix the problem.  Perhaps I should send the TIU in for repair or just buy a new one.

Thanks,

Tom Jasper

Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×