Skip to main content

Reply to "tiu problem no output power to track"

you always get a red blinking light n the tiu on power up , should blink 1 time when first turned on.!

Alan

You always have to have power either fixed input one to power up the tiu control circuits or the aux power input! either input will power the tiu. if your using variable one or two you need power at one of those inputs.

But remember if you power fixed variable voltage 1 in you must have power also to either fixed voltage in or aux to power the tiu electronics!

Alan

you should buy barry's  book it explains everything you need to do to run DCS or variable control form your remote and has all the requirements and what to check in detail when you have a problem such as you do ,will save you a lot of time troubleshooting by using the  DCS COMPANION!

Alan

Last edited by Alan Mancus

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×