Skip to main content

Reply to "TIU tripping breaker?? Help needed"

Barry Broskowitz posted:

Craig,

Would the TIU allow software upgrades to be installed if it were defective out of the box new,

Yes, it would.

or during the sw updates, could the update process have caused this problem??

Highly unlikely, unless it was very roughly handled.

Wires connected correctly. Both transformers also new and work to run trains. 

If you connect the transformer to the TIU's Fixed Channel #1 Input  but do not connect anything to the TIU's Fixed Channel #1 Output, does it still trip the breaker?

Yes, breaker trips with two wires from transformer to TIU input 1 (black to black, red to red) no wires hooked on output side.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×