Skip to main content

Reply to "TIU Variable Channel not working correctly"

Make certain that there are TIU Tracks set up for each variable channel. From page 130 of The DCS Com[anion 3rd Edition:

Creating TIU Tracks on Variable Channels

TIU Tracks are created to allow the DCS operator to vary the voltage to the tracks through the TIU's Variable Channels. TIU Tracks are created as follows:

• Press the Menu key to enter the DCS menus.

• Scroll the thumbwheel to SYSTEM and press the thumbwheel to select it.

• Scroll the thumbwheel to TRACK SETUP and press the thumbwheel to select it.

• Scroll to ADD TRACK and press the thumbwheel to select it.

• Scroll to ADD TIU TRACK and press the thumbwheel to select it.

• A list of available TIUs is displayed. Use the thumbwheel to scroll to the TIU for which a TIU Track is to be created and press the thumbwheel to select it.

• Use the thumbwheel to scroll to the Variable Channel for which the TIU Track is to be created, either Variable 1 or Variable 2, and press the thumbwheel to select it.

• Use the on-screen keyboard to enter the name of the TIU Track for that Variable Channel. Scroll the thumbwheel to each character in the name and press the thumbwheel to add the character. Press < to delete a character entered in error. Scroll to D on the bottom row, right end of the keyboard to save the track's name and be returned to the TRACK SETUP menu.


DCS Book CoverThis and a whole lot more about DCS is all in MTH’s “The DCS Companion 3rd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!
Last edited by Barry Broskowitz
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×