Skip to main content

Reply to "TIU Variable Channel not working correctly"

49th State posted:

Let me explain further...... TIU track "A" using variable channel 1 works as does TIU track "B" using variable channel 2.  If you operate the engine in the power district powered by variable channel 1 and choose TIU track "A" on the handheld it works.  As you move into the other power district powered through variable channel 2 and then change the handheld to TIU track "B" it works.  However, if you select "ALL" TIU channels only TIU track "A"  will work but only in the power district powered through variable channel 1.   When under "All" The engine will run through both power districts but when it is  in the district powered by variable channel 2 you cannot use the Bell, Whistle or Direction control under option "All". .  

 My findings as well years ago  using a postwar ZW.....Barry have you tried this with an older Lionel transformer and not a Z-4000. We can vary the voltage but dir bell etc only works on one channel.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×